NovaStar VX600 Pro is the new all-in-one controller that integrates video processing and control in a single device. The presence of 6 Ethernet output ports provides a loading capacity of 3.9 Mpixels.
A single unit can handle 10,240 pixels wide x 8192 pixels high image. HDMI 2.0 input at high resolution 4K x 2K at 60 Hz, 4K x 2K dot to dot display, high image quality 4K with 6 layers and free scaling for each layer!
In terms of connections, VX600 Pro has 2 HDMI 1.3 inputs, an HDMI 2.0 input / loop and a 3G-SDI input / loop + 1 x USB3.0 and 1 x 10G OPT. There are also 2 optical ports for long distance video signal transmission. A single processor enables three freely switchable modes of operation: video controller, bypass and fiber converter.
In addition to handling an input resolution of 4096 x 2160 @ 60 Hz on an HDMI 2.0 port, this model offers the ability to enable low latency and ByPass mode, essential for real-time video applications, and USB 3.0 Plug & Play playback, not available in the standard VX series.
Finally, for maximum stability, a complete system of redundancy is provided: support for redundant input sources, system configuration, Ethernet ports and devices. With 256 customizable presets and 0 frame latency, this powerful controller can be widely used in applications such as mid- to high-end rental, stage control systems and fine-pitch LED displays.
Technical characteristics
Input connectors
- 1 x 3G-SDI:
- ST-424 (3G), ST-292 (HD) and ST-259 (SD) standard video inputs supported
- Max. input resolution: 1920×1080 @ 60 Hz
- Deinterlacing processing supported
- 3G-SDI loop output supported
- 10-bit video inputs supported
- Does not support input resolution and bit depth settings
- 2 x HDMI 1.3:
- Max. input resolution: 1920 x 1080 @ 60 Hz
- HDCP 1.4 supported
- Does not support interlaced signal inputs
- Custom resolutions supported − Max. width 2048 pixels (2048 x 1080 @ 60 Hz), Max. height 2048 pixels (1080 x 2024 @ 60 Hz)
- 1 x HDMI 2.0:
- Max. input resolution: 4096 x 2160 @ 60 Hz
- Compatible with HDMI 1.4 and HDMI 1.3 video inputs
- HDMI 2.0-1 loop out supported
- Custom resolutions supported: max. width: 8192 pixels (8192 x 1080 @ 60 Hz), max. height: 8188 pixels (1080 x 8188 @ 60 Hz)
- Supports 8 / 10 / 12 bit video inputs
- HDCP 1.4 and HDCP 2.2 supported
- Accompanied audio supported
- Does not support interlaced signal inputs
Output connectors
- 6 x Ethernet ports:
- Max. loading capacity: 3.9 million pixels
- Max. width: 10,240 pixels
- Max. height: 8192 pixels
- A single port loading capacity: 650,000 pixels (input bit depth: 8 bit)
- HDMI 1.3:
- Support monitor and video output modes
- Output resolution: 1920 x 1080 @ 60 Hz (fixed)
- 2 x OPT: 10 G optical fiber ports
- OPT 1: self-adaptive, either for video input or for output
- OPT 2: for output with copy and backup modes or loop output
Audio connectors
- 1 x audio input, 1 x audio output:
- 3.5 mm standard audio input and output connectors
- Audio sampling rate up to 48 kHz
Control connectors
- 2 x Ethernet:
- Connect to the PC and log into the Unico web page for device control
- Input or output connector for device cascading
- 1 x USB 2.0:
- Update the firmware via the USB drive
- Import or export device logs and EDID files
- 1 x RS232:
- RX: receive signals
- TX: send signals
- G: ground
- 1 x GENLock IN-LOOP: connect to an external sync signal. Accepts bi-level and tri-level signals.
- IN: accept the sync signal
- LOOP: loop the sync signal
- Light sensor: connect to a light sensor to collect the ambient brightness, allowing for
- automatic screen brightness adjustment
